果冻乐高积木模型对比

Build a single self-contained HTML file: an interactive 3D toy called "Jelly Bricks" - translucent gummy candy bricks you can grab, stretch, stack into a tower and knock over. Use three.js (import from a CDN) and any lightweight physics library you like. Everything must run by opening the file in a browser.

LOOK
- Bricks are classic stud-on-top building bricks (2x1, 2x2, 3x2, 4x2) in red, orange, yellow, green and blue. No brand names or logos anywhere.
- Material must read as real gummy candy: glossy, translucent, light passing through, deeper colour where the brick is thicker, soft rounded edges and rounded studs. Use MeshPhysicalMaterial with transmission, thickness, attenuation colour, clearcoat, and an environment map for reflections.
- Soft shadows plus a faint coloured glow on the floor under each brick, tinted by its colour.
- Clean white background, slight slow camera drift so the scene feels alive.

JELLY BEHAVIOUR (most important)
- Grab a brick and it stretches toward the cursor before it lifts off, like pulling taffy. Release it and the stretch snaps back with a decaying wobble.
- A brick lagging behind the cursor tilts slightly in the direction it's moving.
- Every landing squashes the brick flat, then it springs back up with a few wobbles (spring-damper squash and shear, done in the vertex shader).
- Dropping a brick on the stack snaps it in place, and the whole tower sways like pudding: each brick's wobble shifts the bricks above it, so the top moves the most.
- Pulling a brick out of the middle of the tower collapses it: the bricks above tumble, bounce off the floor and each other, and scatter a little - lively, not explosive.

UI (minimal editorial style)
- Top left: small caps label "Nº 09 / SOFT GOODS", big serif italic title "Jelly / Bricks." with "Bricks." in red, and a one-line subtitle.
- Floating panel on the right: flavor colour swatches, a "Wobble" slider that controls jelly softness, live "Stack height" and "Bricks" counters, and a black "Pour more bricks" button that drops a handful of new bricks from above with random spin.
- Bottom left hint: "Grab to lift · Drop to snap · Space to wobble". Space shakes the tower.
- Custom round cursor that shrinks while holding a brick.

Start with one 4x2 brick in the centre as the tower base and about 9 bricks scattered around it. Keep it at 60fps on a laptop.

出处：作者在原帖下的回复。提示词保留原文语言，未做改写。

作者提到的工具

更多模型对比案例

• 0:42

  AI自画像挑战：Sonnet5.5对比GPT-6 Astra

  725.5万 播放

• 0:28

  Opus 5.5 对比 GPT-6 Astra 武士游戏演示

  111.7万 播放

• 0:30

  GPT-6 Astra对比Claude Opus5.5

  60.4万 播放

• 0:13

  软糖熊软体物理场景

  60万 播放

• 0:22

  Grok与Opus摸草模拟器成本对比

  55.2万 播放

• 0:44

  Opus5.5对比GPT-6 Sol虚幻引擎游戏开发

  54万 播放